Brand PRO ELEC
A powerful solar powered LED light that is simple to install and requires no wiring or mains power. The intuitive motion sensor triggers a bright LED light in the hours of darkness when motion is detected, providing a reliable and energy efficient solution for outdoor illumination and security lighting.
Note: Please allow at least 7 hours to fully charge the battery initially
Specifications:
Light source: 36x SMD2835 LEDs, Colour temperature 6000-6500K (white colour)
4 Lighting modes: Off/Low/High/Sensor
320 Lumens output (High/Sensor) and 60 Lumens (Low)
10m Sensor distance
Sensor angle: 120°
12 Second auto delay function
IP65 Rated housing
Monocrystal silicon solar panel, 2W (5.5V, 370mA)
2x Rechargeable Li-ion batteries included, approx. 7 hours charging time
Continuous lighting time approx. 16 hours
Integrated battery protection technology on PCB; protected against overcharge, over discharge, over current and over voltage
Dimensions (HxWxD): 125x272x75mm
Operation:
When set to LOW and the ambient light is low it will light continuously at approx 60 lumen. No motion detection is active.
When set to HIGH and the ambient light is low it will light continuously at approx 60 lumen, but when the sensor detects movement, it will switch to high brightness of approx 320 lumen.
If the sensor doesn’t detect movement after 12 seconds the light will return to low brightness of approx 60 lumen.
In AUTO mode the light will only illuminate when motion is detected at high brightness of approx 320 lumen.
When no further motion is detected, the light will extinguish after 12 seconds.
What's in the box?
1 x Ex-Pro Solar PIR Light
